M K Srinivasan Systems Private Limited

The overhead Distribution Line Fault Analyser System is designed & developed to be utilized as a precise fault locating tool for Main and Spur lines with longer distance of Rural & Industrial feeders 

with extended applications of line healthiness study, pre-charging and pre-commissioning checks. 

Deployment of the Distribution line fault analyser at each substation ensures optimal uptime of the Distribution line network. 

This can be achieved through: 

- Enhanced life of the deployed Distribution Lines 

- Identify any fault during commissioning and trips- 

- Faster deployment of Distribution during disaster management situations 

APPLICATION OF THE DISTRIBUTION LINE FAULT LOCATOR 

1. Breakdown Maintenance 

a. Open Circuit Fault location: The Distribution Line Fault locator precisely detects and locate all kind of open faults in 11kV & 33kV overhead distribution lines with accuracy of +/- 50 Mtrs. 

Most common open circuit faults experienced by DISCOM’s are of jumper open, DOL Open, broken conductor and Decapping faults. overhead distribution fault locator precisely identify the 

fault distance in Kms. to help O&M team of DISCOM’s. 

b. Short Circuit Faults: 

1. Line-to-line Fault (LL) : A short circuit between lines, caused by ionization of air, or when lines come into physical contact, for example due to a broken insulator. In transmission line faults, roughly 5% - 10% are asymmetric line-to-line faults. 

2. Line-to-ground Fault (LG) : A short circuit between one line and ground, very often caused by physical contact, for example due to lightning or other storm damage. In transmission line faults, roughly 65% - 70% are asymmetric line-to-ground faults. 

3. Double line-to-ground Fault (LLG) : Two lines come into contact with the ground (and each other), also commonly due to storm damage. In transmission line faults, roughly 15% - 20% are 

asymmetric double line-to-ground. 

4. 3-Phase Fault (LLL) : A short circuit between all the 3 phases when lines come into physical contact or incase of disaster situation and in case of transient fault. 

Taurus Max overhead power line fault locator exactly detect and locate all kind of short circuit faults in breakdown condition. 

2. Commissioning of new lines 

a. Line length verification: By Taurus Over Head Fault locator line length can be verified from end to end to confirm the total length of the conductors in Rural/Industrial feeders accurately. 

b. Phase sequence test : One of the important tests to ensure each phase STARTs and ENDs as designed. By using fault locator all 3- Phase Sequence test can done on each phases before 

Charging of the line to confirm the correct synchronization with 3- Phase balanced system. 

c. Continuity test : This test is carried out to confirm that there are no dead Open/Short faults in all the 3-phases across the line. The process for phase sequence also confirms the continuity.

The TAURUS  overhead Power Line Fault Analyser System is designed & developed to be utilized as a precise fault locating tool for Main and Spur lines with extended applications of line healthiness study, pre-charging and pre-commissioning checks. 

Deployment of the Power line fault analyser at each substation ensures optimal uptime of the power line network. This can be achieved through: 

- Enhanced life of the deployed Power Lines 

- Identify any fault during commissioning and trips- 

- Faster deployment of power during disaster management situations 

Application of the Power Line Fault Analyser 

1. Line diagnostic study (Predictive maintenance): Historical data of the Line Signature is extremely beneficial to plan the Maintenance Work well in advance to prevent breakdowns. 

The Distribution Line Fault Analyser comes with inbuilt software application which compares the current Signature with the earlier reading and highlights the differences with the help of a Laptop. This software helps to study & analyser the trend in the abnormalities being developed in the Power Line. 

Taking line signatures at regular intervals helps in monitoring of the condition of the lines and one can predict the breakdown using this tool. 

b.    F a u l t l o c a t i o n ( D i s a s t e r Management): 

The Power Line Fault Analyser precisely detects any or all types of open & short faults that causes 

line breakdown. An important tool for accurate fault finding that can save enormous time and revenue for the utility. 

During Disaster Management situations, this is an indispensable tool to quickly identify the faults and restore the entire Power line system. The Power Line Fault Analyser helps in identifying the abnormal points in the line quickly irrespective of the length of the line, which otherwise would have been done with manual inspection. Considerable time & money can be saved instead of patrolling enter line. 

Application: 

The following tests are conducted on the power line with the Taurus MAX-3 for Power Line 

- Power Line continuity test 

- Power line Phase sequence tests 

- Line Signature Analysis study for the entire length of the Power line 

- Line Healthiness Analysis and diagnostics 

- Commissioning of new Overhead Power Lines 

- Virtual Line Patrolling 

- Prediction of inhomogeneous points in the Power line 

- Overhead Power Line Signature Analysis 

- Offline Fault Location 

- All types of faults & inhomogeneity in the line is located accurately with a resolution of +/- 100 Mtrs within a very short period of time. 

These tests does not require any complimentary & supporting data / equipment at the far end of the line.

The TAURUS  overhead Power Line Fault Analyser System is designed & developed to be utilized as a precise fault locating tool for Main and Spur lines with extended applications of line healthiness study, pre-charging and pre-commissioning checks. 

Deployment of the Power line fault analyser at each substation ensures optimal uptime of the power line network. This can be achieved through: 

- Enhanced life of the deployed Power Lines 

- Identify any fault during commissioning and trips- 

- Faster deployment of power during disaster management situations 

Application of the Power Line Fault Analyser 

1. Line diagnostic study (Predictive maintenance): Historical data of the Line Signature is extremely beneficial to plan the Maintenance Work well in advance to prevent breakdowns. 

The Distribution Line Fault Analyser comes with inbuilt software application which compares the current Signature with the earlier reading and highlights the differences with the help of a Laptop. This software helps to study & analyser the trend in the abnormalities being developed in the Power Line. 

Taking line signatures at regular intervals helps in monitoring of the condition of the lines and one can predict the breakdown using this tool. 

b.    F a u l t l o c a t i o n ( D i s a s t e r Management): 

The Power Line Fault Analyser precisely detects any or all types of open & short faults that causes 

line breakdown. An important tool for accurate fault finding that can save enormous time and revenue for the utility. 

During Disaster Management situations, this is an indispensable tool to quickly identify the faults and restore the entire Power line system. The Power Line Fault Analyser helps in identifying the abnormal points in the line quickly irrespective of the length of the line, which otherwise would have been done with manual inspection. Considerable time & money can be saved instead of patrolling enter line. 

Application: 

The following tests are conducted on the power line with the Taurus MAX-3 for Power Line 

- Power Line continuity test 

- Power line Phase sequence tests 

- Line Signature Analysis study for the entire length of the Power line 

- Line Healthiness Analysis and diagnostics 

- Commissioning of new Overhead Power Lines 

- Virtual Line Patrolling 

- Prediction of inhomogeneous points in the Power line 

- Overhead Power Line Signature Analysis 

- Offline Fault Location 

- All types of faults & inhomogeneity in the line is located accurately with a resolution of +/- 100 Mtrs within a very short period of time. 

These tests does not require any complimentary & supporting data / equipment at the far end of the line.

The TAURUS  overhead Power Line Fault Analyser System is designed & developed to be utilized as a precise fault locating tool for Main and Spur lines with extended applications of line healthiness study, pre-charging and pre-commissioning checks. 

Deployment of the Power line fault analyser at each substation ensures optimal uptime of the power line network. This can be achieved through: 

- Enhanced life of the deployed Power Lines 

- Identify any fault during commissioning and trips- 

- Faster deployment of power during disaster management situations 

Application of the Power Line Fault Analyser 

1. Line diagnostic study (Predictive maintenance): Historical data of the Line Signature is extremely beneficial to plan the Maintenance Work well in advance to prevent breakdowns. 

The Distribution Line Fault Analyser comes with inbuilt software application which compares the current Signature with the earlier reading and highlights the differences with the help of a Laptop. This software helps to study & analyser the trend in the abnormalities being developed in the Power Line. 

Taking line signatures at regular intervals helps in monitoring of the condition of the lines and one can predict the breakdown using this tool. 

b.    F a u l t l o c a t i o n ( D i s a s t e r Management): 

The Power Line Fault Analyser precisely detects any or all types of open & short faults that causes 

line breakdown. An important tool for accurate fault finding that can save enormous time and revenue for the utility. 

During Disaster Management situations, this is an indispensable tool to quickly identify the faults and restore the entire Power line system. The Power Line Fault Analyser helps in identifying the abnormal points in the line quickly irrespective of the length of the line, which otherwise would have been done with manual inspection. Considerable time & money can be saved instead of patrolling enter line. 

Application: 

The following tests are conducted on the power line with the Taurus MAX-3 for Power Line 

- Power Line continuity test 

- Power line Phase sequence tests 

- Line Signature Analysis study for the entire length of the Power line 

- Line Healthiness Analysis and diagnostics 

- Commissioning of new Overhead Power Lines 

- Virtual Line Patrolling 

- Prediction of inhomogeneous points in the Power line 

- Overhead Power Line Signature Analysis 

- Offline Fault Location 

- All types of faults & inhomogeneity in the line is located accurately with a resolution of +/- 100 Mtrs within a very short period of time. 

These tests does not require any complimentary & supporting data / equipment at the far end of the line.

The TAURUS  overhead Power Line Fault Analyser System is designed & developed to be utilized as a precise fault locating tool for Main and Spur lines with extended applications of line healthiness study, pre-charging and pre-commissioning checks. 

Deployment of the Power line fault analyser at each substation ensures optimal uptime of the power line network. This can be achieved through: 

- Enhanced life of the deployed Power Lines 

- Identify any fault during commissioning and trips- 

- Faster deployment of power during disaster management situations 

Application of the Power Line Fault Analyser 

1. Line diagnostic study (Predictive maintenance): Historical data of the Line Signature is extremely beneficial to plan the Maintenance Work well in advance to prevent breakdowns. 

The Distribution Line Fault Analyser comes with inbuilt software application which compares the current Signature with the earlier reading and highlights the differences with the help of a Laptop. This software helps to study & analyser the trend in the abnormalities being developed in the Power Line. 

Taking line signatures at regular intervals helps in monitoring of the condition of the lines and one can predict the breakdown using this tool. 

b.    F a u l t l o c a t i o n ( D i s a s t e r Management): 

The Power Line Fault Analyser precisely detects any or all types of open & short faults that causes 

line breakdown. An important tool for accurate fault finding that can save enormous time and revenue for the utility. 

During Disaster Management situations, this is an indispensable tool to quickly identify the faults and restore the entire Power line system. The Power Line Fault Analyser helps in identifying the abnormal points in the line quickly irrespective of the length of the line, which otherwise would have been done with manual inspection. Considerable time & money can be saved instead of patrolling enter line. 

Application: 

The following tests are conducted on the power line with the Taurus MAX-3 for Power Line 

- Power Line continuity test 

- Power line Phase sequence tests 

- Line Signature Analysis study for the entire length of the Power line 

- Line Healthiness Analysis and diagnostics 

- Commissioning of new Overhead Power Lines 

- Virtual Line Patrolling 

- Prediction of inhomogeneous points in the Power line 

- Overhead Power Line Signature Analysis 

- Offline Fault Location 

- All types of faults & inhomogeneity in the line is located accurately with a resolution of +/- 100 Mtrs within a very short period of time. 

These tests does not require any complimentary & supporting data / equipment at the far end of the line.

The TAURUS  overhead Power Line Fault Analyser System is designed & developed to be utilized as a precise fault locating tool for Main and Spur lines with extended applications of line healthiness study, pre-charging and pre-commissioning checks. 

Deployment of the Power line fault analyser at each substation ensures optimal uptime of the power line network. This can be achieved through: 

- Enhanced life of the deployed Power Lines 

- Identify any fault during commissioning and trips- 

- Faster deployment of power during disaster management situations 

Application of the Power Line Fault Analyser 

1. Line diagnostic study (Predictive maintenance): Historical data of the Line Signature is extremely beneficial to plan the Maintenance Work well in advance to prevent breakdowns. 

The Distribution Line Fault Analyser comes with inbuilt software application which compares the current Signature with the earlier reading and highlights the differences with the help of a Laptop. This software helps to study & analyser the trend in the abnormalities being developed in the Power Line. 

Taking line signatures at regular intervals helps in monitoring of the condition of the lines and one can predict the breakdown using this tool. 

b.    F a u l t l o c a t i o n ( D i s a s t e r Management): 

The Power Line Fault Analyser precisely detects any or all types of open & short faults that causes 

line breakdown. An important tool for accurate fault finding that can save enormous time and revenue for the utility. 

During Disaster Management situations, this is an indispensable tool to quickly identify the faults and restore the entire Power line system. The Power Line Fault Analyser helps in identifying the abnormal points in the line quickly irrespective of the length of the line, which otherwise would have been done with manual inspection. Considerable time & money can be saved instead of patrolling enter line. 

Application: 

The following tests are conducted on the power line with the Taurus MAX-3 for Power Line 

- Power Line continuity test 

- Power line Phase sequence tests 

- Line Signature Analysis study for the entire length of the Power line 

- Line Healthiness Analysis and diagnostics 

- Commissioning of new Overhead Power Lines 

- Virtual Line Patrolling 

- Prediction of inhomogeneous points in the Power line 

- Overhead Power Line Signature Analysis 

- Offline Fault Location 

- All types of faults & inhomogeneity in the line is located accurately with a resolution of +/- 100 Mtrs within a very short period of time. 

These tests does not require any complimentary & supporting data / equipment at the far end of the line.

The TAURUS  overhead Power Line Fault Analyser System is designed & developed to be utilized as a precise fault locating tool for Main and Spur lines with extended applications of line healthiness study, pre-charging and pre-commissioning checks. 

Deployment of the Power line fault analyser at each substation ensures optimal uptime of the power line network. This can be achieved through: 

- Enhanced life of the deployed Power Lines 

- Identify any fault during commissioning and trips- 

- Faster deployment of power during disaster management situations 

Application of the Power Line Fault Analyser 

1. Line diagnostic study (Predictive maintenance): Historical data of the Line Signature is extremely beneficial to plan the Maintenance Work well in advance to prevent breakdowns. 

The Distribution Line Fault Analyser comes with inbuilt software application which compares the current Signature with the earlier reading and highlights the differences with the help of a Laptop. This software helps to study & analyser the trend in the abnormalities being developed in the Power Line. 

Taking line signatures at regular intervals helps in monitoring of the condition of the lines and one can predict the breakdown using this tool. 

b.    F a u l t l o c a t i o n ( D i s a s t e r Management): 

The Power Line Fault Analyser precisely detects any or all types of open & short faults that causes 

line breakdown. An important tool for accurate fault finding that can save enormous time and revenue for the utility. 

During Disaster Management situations, this is an indispensable tool to quickly identify the faults and restore the entire Power line system. The Power Line Fault Analyser helps in identifying the abnormal points in the line quickly irrespective of the length of the line, which otherwise would have been done with manual inspection. Considerable time & money can be saved instead of patrolling enter line. 

Application: 

The following tests are conducted on the power line with the Taurus MAX-3 for Power Line 

- Power Line continuity test 

- Power line Phase sequence tests 

- Line Signature Analysis study for the entire length of the Power line 

- Line Healthiness Analysis and diagnostics 

- Commissioning of new Overhead Power Lines 

- Virtual Line Patrolling 

- Prediction of inhomogeneous points in the Power line 

- Overhead Power Line Signature Analysis 

- Offline Fault Location 

- All types of faults & inhomogeneity in the line is located accurately with a resolution of +/- 100 Mtrs within a very short period of time. 

These tests does not require any complimentary & supporting data / equipment at the far end of the line. 

The TAURUS  overhead Power Line Fault Analyser System is designed & developed to be utilized as a precise fault locating tool for Main and Spur lines with extended applications of line healthiness study, pre-charging and pre-commissioning checks. 

Deployment of the Power line fault analyser at each substation ensures optimal uptime of the power line network. This can be achieved through: 

- Enhanced life of the deployed Power Lines 

- Identify any fault during commissioning and trips- 

- Faster deployment of power during disaster management situations 

Application of the Power Line Fault Analyser 

1. Line diagnostic study (Predictive maintenance): Historical data of the Line Signature is extremely beneficial to plan the Maintenance Work well in advance to prevent breakdowns. 

The Distribution Line Fault Analyser comes with inbuilt software application which compares the current Signature with the earlier reading and highlights the differences with the help of a Laptop. This software helps to study & analyser the trend in the abnormalities being developed in the Power Line. 

Taking line signatures at regular intervals helps in monitoring of the condition of the lines and one can predict the breakdown using this tool. 

b.    F a u l t l o c a t i o n ( D i s a s t e r Management): 

The Power Line Fault Analyser precisely detects any or all types of open & short faults that causes 

line breakdown. An important tool for accurate fault finding that can save enormous time and revenue for the utility. 

During Disaster Management situations, this is an indispensable tool to quickly identify the faults and restore the entire Power line system. The Power Line Fault Analyser helps in identifying the abnormal points in the line quickly irrespective of the length of the line, which otherwise would have been done with manual inspection. Considerable time & money can be saved instead of patrolling enter line. 

Application: 

The following tests are conducted on the power line with the Taurus MAX-3 for Power Line 

- Power Line continuity test 

- Power line Phase sequence tests 

- Line Signature Analysis study for the entire length of the Power line 

- Line Healthiness Analysis and diagnostics 

- Commissioning of new Overhead Power Lines 

- Virtual Line Patrolling 

- Prediction of inhomogeneous points in the Power line 

- Overhead Power Line Signature Analysis 

- Offline Fault Location 

- All types of faults & inhomogeneity in the line is located accurately with a resolution of +/- 100 Mtrs within a very short period of time. 

These tests does not require any complimentary & supporting data / equipment at the far end of the line. 

The TAURUS  overhead Power Line Fault Analyser System is designed & developed to be utilized as a precise fault locating tool for Main and Spur lines with extended applications of line healthiness study, pre-charging and pre-commissioning checks. 

Deployment of the Power line fault analyser at each substation ensures optimal uptime of the power line network. This can be achieved through: 

- Enhanced life of the deployed Power Lines 

- Identify any fault during commissioning and trips- 

- Faster deployment of power during disaster management situations 

Application of the Power Line Fault Analyser 

1. Line diagnostic study (Predictive maintenance): Historical data of the Line Signature is extremely beneficial to plan the Maintenance Work well in advance to prevent breakdowns. 

The Distribution Line Fault Analyser comes with inbuilt software application which compares the current Signature with the earlier reading and highlights the differences with the help of a Laptop. This software helps to study & analyser the trend in the abnormalities being developed in the Power Line. 

Taking line signatures at regular intervals helps in monitoring of the condition of the lines and one can predict the breakdown using this tool. 

b.    F a u l t l o c a t i o n ( D i s a s t e r Management): 

The Power Line Fault Analyser precisely detects any or all types of open & short faults that causes 

line breakdown. An important tool for accurate fault finding that can save enormous time and revenue for the utility. 

During Disaster Management situations, this is an indispensable tool to quickly identify the faults and restore the entire Power line system. The Power Line Fault Analyser helps in identifying the abnormal points in the line quickly irrespective of the length of the line, which otherwise would have been done with manual inspection. Considerable time & money can be saved instead of patrolling enter line. 

Application: 

The following tests are conducted on the power line with the Taurus MAX-3 for Power Line 

- Power Line continuity test 

- Power line Phase sequence tests 

- Line Signature Analysis study for the entire length of the Power line 

- Line Healthiness Analysis and diagnostics 

- Commissioning of new Overhead Power Lines 

- Virtual Line Patrolling 

- Prediction of inhomogeneous points in the Power line 

- Overhead Power Line Signature Analysis 

- Offline Fault Location 

- All types of faults & inhomogeneity in the line is located accurately with a resolution of +/- 100 Mtrs within a very short period of time. 

These tests does not require any complimentary & supporting data / equipment at the far end of the line.

The TAURUS  overhead Power Line Fault Analyser System is designed & developed to be utilized as a precise fault locating tool for Main and Spur lines with extended applications of line healthiness study, pre-charging and pre-commissioning checks. 

Deployment of the Power line fault analyser at each substation ensures optimal uptime of the power line network. This can be achieved through: 

- Enhanced life of the deployed Power Lines 

- Identify any fault during commissioning and trips- 

- Faster deployment of power during disaster management situations 

Application of the Power Line Fault Analyser 

1. Line diagnostic study (Predictive maintenance): Historical data of the Line Signature is extremely beneficial to plan the Maintenance Work well in advance to prevent breakdowns. 

The Distribution Line Fault Analyser comes with inbuilt software application which compares the current Signature with the earlier reading and highlights the differences with the help of a Laptop. This software helps to study & analyser the trend in the abnormalities being developed in the Power Line. 

Taking line signatures at regular intervals helps in monitoring of the condition of the lines and one can predict the breakdown using this tool. 

b.    F a u l t l o c a t i o n ( D i s a s t e r Management): 

The Power Line Fault Analyser precisely detects any or all types of open & short faults that causes 

line breakdown. An important tool for accurate fault finding that can save enormous time and revenue for the utility. 

During Disaster Management situations, this is an indispensable tool to quickly identify the faults and restore the entire Power line system. The Power Line Fault Analyser helps in identifying the abnormal points in the line quickly irrespective of the length of the line, which otherwise would have been done with manual inspection. Considerable time & money can be saved instead of patrolling enter line. 

Application: 

The following tests are conducted on the power line with the Taurus MAX-3 for Power Line 

- Power Line continuity test 

- Power line Phase sequence tests 

- Line Signature Analysis study for the entire length of the Power line 

- Line Healthiness Analysis and diagnostics 

- Commissioning of new Overhead Power Lines 

- Virtual Line Patrolling 

- Prediction of inhomogeneous points in the Power line 

- Overhead Power Line Signature Analysis 

- Offline Fault Location 

- All types of faults & inhomogeneity in the line is located accurately with a resolution of +/- 100 Mtrs within a very short period of time. 

These tests does not require any complimentary & supporting data / equipment at the far end of the line. 

The overhead Distribution Line Fault Analyser System is designed & developed to be utilized as a precise fault locating tool for Main and Spur lines with longer distance of Rural & Industrial feeders 

with extended applications of line healthiness study, pre-charging and pre-commissioning checks. 

Deployment of the Distribution line fault analyser at each substation ensures optimal uptime of the Distribution line network. 

This can be achieved through: 

- Enhanced life of the deployed Distribution Lines 

- Identify any fault during commissioning and trips- 

- Faster deployment of Distribution during disaster management situations 

APPLICATION OF THE DISTRIBUTION LINE FAULT LOCATOR 

1. Breakdown Maintenance 

a. Open Circuit Fault location: The Distribution Line Fault locator precisely detects and locate all kind of open faults in 11kV & 33kV overhead distribution lines with accuracy of +/- 50 Mtrs. 

Most common open circuit faults experienced by DISCOM’s are of jumper open, DOL Open, broken conductor and Decapping faults. overhead distribution fault locator precisely identify the 

fault distance in Kms. to help O&M team of DISCOM’s. 

b. Short Circuit Faults: 

1. Line-to-line Fault (LL) : A short circuit between lines, caused by ionization of air, or when lines come into physical contact, for example due to a broken insulator. In transmission line faults, roughly 5% - 10% are asymmetric line-to-line faults. 

2. Line-to-ground Fault (LG) : A short circuit between one line and ground, very often caused by physical contact, for example due to lightning or other storm damage. In transmission line faults, roughly 65% - 70% are asymmetric line-to-ground faults. 

3. Double line-to-ground Fault (LLG) : Two lines come into contact with the ground (and each other), also commonly due to storm damage. In transmission line faults, roughly 15% - 20% are 

asymmetric double line-to-ground. 

4. 3-Phase Fault (LLL) : A short circuit between all the 3 phases when lines come into physical contact or incase of disaster situation and in case of transient fault. 

Taurus Max overhead power line fault locator exactly detect and locate all kind of short circuit faults in breakdown condition. 

2. Commissioning of new lines 

a. Line length verification: By Taurus Over Head Fault locator line length can be verified from end to end to confirm the total length of the conductors in Rural/Industrial feeders accurately. 

b. Phase sequence test : One of the important tests to ensure each phase STARTs and ENDs as designed. By using fault locator all 3- Phase Sequence test can done on each phases before 

Charging of the line to confirm the correct synchronization with 3- Phase balanced system. 

c. Continuity test : This test is carried out to confirm that there are no dead Open/Short faults in all the 3-phases across the line. The process for phase sequence also confirms the continuity. 

The TAURUS  overhead Power Line Fault Analyser System is designed & developed to be utilized as a precise fault locating tool for Main and Spur lines with extended applications of line healthiness study, pre-charging and pre-commissioning checks. 

Deployment of the Power line fault analyser at each substation ensures optimal uptime of the power line network. This can be achieved through: 

- Enhanced life of the deployed Power Lines 

- Identify any fault during commissioning and trips- 

- Faster deployment of power during disaster management situations 

Application of the Power Line Fault Analyser 

1. Line diagnostic study (Predictive maintenance): Historical data of the Line Signature is extremely beneficial to plan the Maintenance Work well in advance to prevent breakdowns. 

The Distribution Line Fault Analyser comes with inbuilt software application which compares the current Signature with the earlier reading and highlights the differences with the help of a Laptop. This software helps to study & analyser the trend in the abnormalities being developed in the Power Line. 

Taking line signatures at regular intervals helps in monitoring of the condition of the lines and one can predict the breakdown using this tool. 

b.    F a u l t l o c a t i o n ( D i s a s t e r Management): 

The Power Line Fault Analyser precisely detects any or all types of open & short faults that causes 

line breakdown. An important tool for accurate fault finding that can save enormous time and revenue for the utility. 

During Disaster Management situations, this is an indispensable tool to quickly identify the faults and restore the entire Power line system. The Power Line Fault Analyser helps in identifying the abnormal points in the line quickly irrespective of the length of the line, which otherwise would have been done with manual inspection. Considerable time & money can be saved instead of patrolling enter line. 

Application: 

The following tests are conducted on the power line with the Taurus MAX-3 for Power Line 

- Power Line continuity test 

- Power line Phase sequence tests 

- Line Signature Analysis study for the entire length of the Power line 

- Line Healthiness Analysis and diagnostics 

- Commissioning of new Overhead Power Lines 

- Virtual Line Patrolling 

- Prediction of inhomogeneous points in the Power line 

- Overhead Power Line Signature Analysis 

- Offline Fault Location 

- All types of faults & inhomogeneity in the line is located accurately with a resolution of +/- 100 Mtrs within a very short period of time. 

These tests does not require any complimentary & supporting data / equipment at the far end of the line. 

TAURUS Overhead EHV AC Transmission The TAURUS  overhead Power Line Fault Analyser System is designed & developed to be utilized as a precise fault locating tool for Main and Spur lines with extended applications of line healthiness study, pre-charging and pre-commissioning checks. 

Deployment of the Power line fault analyser at each substation ensures optimal uptime of the power line network. This can be achieved through: 

- Enhanced life of the deployed Power Lines 

- Identify any fault during commissioning and trips- 

- Faster deployment of power during disaster management situations 

Application of the Power Line Fault Analyser 

1. Line diagnostic study (Predictive maintenance): Historical data of the Line Signature is extremely beneficial to plan the Maintenance Work well in advance to prevent breakdowns. 

The Distribution Line Fault Analyser comes with inbuilt software application which compares the current Signature with the earlier reading and highlights the differences with the help of a Laptop. This software helps to study & analyser the trend in the abnormalities being developed in the Power Line. 

Taking line signatures at regular intervals helps in monitoring of the condition of the lines and one can predict the breakdown using this tool. 

b.    F a u l t l o c a t i o n ( D i s a s t e r Management): 

The Power Line Fault Analyser precisely detects any or all types of open & short faults that causes 

line breakdown. An important tool for accurate fault finding that can save enormous time and revenue for the utility. 

During Disaster Management situations, this is an indispensable tool to quickly identify the faults and restore the entire Power line system. The Power Line Fault Analyser helps in identifying the abnormal points in the line quickly irrespective of the length of the line, which otherwise would have been done with manual inspection. Considerable time & money can be saved instead of patrolling enter line. 

Application: 

The following tests are conducted on the power line with the Taurus MAX-3 for Power Line 

- Power Line continuity test 

- Power line Phase sequence tests 

- Line Signature Analysis study for the entire length of the Power line 

- Line Healthiness Analysis and diagnostics 

- Commissioning of new Overhead Power Lines 

- Virtual Line Patrolling 

- Prediction of inhomogeneous points in the Power line 

- Overhead Power Line Signature Analysis 

- Offline Fault Location 

- All types of faults & inhomogeneity in the line is located accurately with a resolution of +/- 100 Mtrs within a very short period of time. 

These tests does not require any complimentary & supporting data / equipment at the far end of the line. 

The TAURUS  overhead Power Line Fault Analyser System is designed & developed to be utilized as a precise fault locating tool for Main and Spur lines with extended applications of line healthiness study, pre-charging and pre-commissioning checks. 

Deployment of the Power line fault analyser at each substation ensures optimal uptime of the power line network. This can be achieved through: 

- Enhanced life of the deployed Power Lines 

- Identify any fault during commissioning and trips- 

- Faster deployment of power during disaster management situations 

Application of the Power Line Fault Analyser 

1. Line diagnostic study (Predictive maintenance): Historical data of the Line Signature is extremely beneficial to plan the Maintenance Work well in advance to prevent breakdowns. 

The Distribution Line Fault Analyser comes with inbuilt software application which compares the current Signature with the earlier reading and highlights the differences with the help of a Laptop. This software helps to study & analyser the trend in the abnormalities being developed in the Power Line. 

Taking line signatures at regular intervals helps in monitoring of the condition of the lines and one can predict the breakdown using this tool. 

b.    F a u l t l o c a t i o n ( D i s a s t e r Management): 

The Power Line Fault Analyser precisely detects any or all types of open & short faults that causes 

line breakdown. An important tool for accurate fault finding that can save enormous time and revenue for the utility. 

During Disaster Management situations, this is an indispensable tool to quickly identify the faults and restore the entire Power line system. The Power Line Fault Analyser helps in identifying the abnormal points in the line quickly irrespective of the length of the line, which otherwise would have been done with manual inspection. Considerable time & money can be saved instead of patrolling enter line. 

Application: 

The following tests are conducted on the power line with the Taurus MAX-3 for Power Line 

- Power Line continuity test 

- Power line Phase sequence tests 

- Line Signature Analysis study for the entire length of the Power line 

- Line Healthiness Analysis and diagnostics 

- Commissioning of new Overhead Power Lines 

- Virtual Line Patrolling 

- Prediction of inhomogeneous points in the Power line 

- Overhead Power Line Signature Analysis 

- Offline Fault Location 

- All types of faults & inhomogeneity in the line is located accurately with a resolution of +/- 100 Mtrs within a very short period of time. 

These tests does not require any complimentary & supporting data / equipment at the far end of the line.

The TAURUS  overhead Power Line Fault Analyser System is designed & developed to be utilized as a precise fault locating tool for Main and Spur lines with extended applications of line healthiness study, pre-charging and pre-commissioning checks. 

Deployment of the Power line fault analyser at each substation ensures optimal uptime of the power line network. This can be achieved through: 

- Enhanced life of the deployed Power Lines 

- Identify any fault during commissioning and trips- 

- Faster deployment of power during disaster management situations 

Application of the Power Line Fault Analyser 

1. Line diagnostic study (Predictive maintenance): Historical data of the Line Signature is extremely beneficial to plan the Maintenance Work well in advance to prevent breakdowns. 

The Distribution Line Fault Analyser comes with inbuilt software application which compares the current Signature with the earlier reading and highlights the differences with the help of a Laptop. This software helps to study & analyser the trend in the abnormalities being developed in the Power Line. 

Taking line signatures at regular intervals helps in monitoring of the condition of the lines and one can predict the breakdown using this tool. 

b.    F a u l t l o c a t i o n ( D i s a s t e r Management): 

The Power Line Fault Analyser precisely detects any or all types of open & short faults that causes 

line breakdown. An important tool for accurate fault finding that can save enormous time and revenue for the utility. 

During Disaster Management situations, this is an indispensable tool to quickly identify the faults and restore the entire Power line system. The Power Line Fault Analyser helps in identifying the abnormal points in the line quickly irrespective of the length of the line, which otherwise would have been done with manual inspection. Considerable time & money can be saved instead of patrolling enter line. 

Application: 

The following tests are conducted on the power line with the Taurus MAX-3 for Power Line 

- Power Line continuity test 

- Power line Phase sequence tests 

- Line Signature Analysis study for the entire length of the Power line 

- Line Healthiness Analysis and diagnostics 

- Commissioning of new Overhead Power Lines 

- Virtual Line Patrolling 

- Prediction of inhomogeneous points in the Power line 

- Overhead Power Line Signature Analysis 

- Offline Fault Location 

- All types of faults & inhomogeneity in the line is located accurately with a resolution of +/- 100 Mtrs within a very short period of time. 

These tests does not require any complimentary & supporting data / equipment at the far end of the line.

The TAURUS  overhead Power Line Fault Analyser System is designed & developed to be utilized as a precise fault locating tool for Main and Spur lines with extended applications of line healthiness study, pre-charging and pre-commissioning checks. 

Deployment of the Power line fault analyser at each substation ensures optimal uptime of the power line network. This can be achieved through: 

- Enhanced life of the deployed Power Lines 

- Identify any fault during commissioning and trips- 

- Faster deployment of power during disaster management situations 

Application of the Power Line Fault Analyser 

1. Line diagnostic study (Predictive maintenance): Historical data of the Line Signature is extremely beneficial to plan the Maintenance Work well in advance to prevent breakdowns. 

The Distribution Line Fault Analyser comes with inbuilt software application which compares the current Signature with the earlier reading and highlights the differences with the help of a Laptop. This software helps to study & analyser the trend in the abnormalities being developed in the Power Line. 

Taking line signatures at regular intervals helps in monitoring of the condition of the lines and one can predict the breakdown using this tool. 

b.    F a u l t l o c a t i o n ( D i s a s t e r Management): 

The Power Line Fault Analyser precisely detects any or all types of open & short faults that causes 

line breakdown. An important tool for accurate fault finding that can save enormous time and revenue for the utility. 

During Disaster Management situations, this is an indispensable tool to quickly identify the faults and restore the entire Power line system. The Power Line Fault Analyser helps in identifying the abnormal points in the line quickly irrespective of the length of the line, which otherwise would have been done with manual inspection. Considerable time & money can be saved instead of patrolling enter line. 

Application: 

The following tests are conducted on the power line with the Taurus MAX-3 for Power Line 

- Power Line continuity test 

- Power line Phase sequence tests 

- Line Signature Analysis study for the entire length of the Power line 

- Line Healthiness Analysis and diagnostics 

- Commissioning of new Overhead Power Lines 

- Virtual Line Patrolling 

- Prediction of inhomogeneous points in the Power line 

- Overhead Power Line Signature Analysis 

- Offline Fault Location 

- All types of faults & inhomogeneity in the line is located accurately with a resolution of +/- 100 Mtrs within a very short period of time. 

These tests does not require any complimentary & supporting data / equipment at the far end of the line. 

TAURUS Overhead AC Distribution Line Analyzer is a revolutionary innovative system to significantly minimize the distribution line downtime and overall line maintenance time. SIGMAX is the third generation, one of its kind products that work on the principle of multiple pulse echo co-relation technique, using advanced matrix processors. A single system offers a cost effective monitoring of all AC overhead de- energized lines from 11kV to 33kV, providing accurate information on all faults and line signature analysis, which give data of all in homogeneous points. A stand alone, portable, offline kit capable of finding fault accurately to the tower (non-system based, non-stress affected), is required not only to accurately find faults, but also to declare line healthy after a short duration of sustained transient fault avoiding rigorous patrolling.

Applications:
N Exact length of the line is digitally measured & hence provides the most accurate distance in kilometers.
N Continuity test.

N Phase sequence tests.

N Line Signature Analysis study for the entire length of line etc., and all this without the necessity for any complimentary & supporting equipment at the far end of the line.

N Line Healthiness Analysis and diagnosis

N Commissioning of new Overhead Distribution Line

N Virtual Line Patrolling

N Predicts inhomogeneous points

N Overhead AC Distribution Line Signature Analysis

N Offline Fault Location

N All types of faults & inhomogeneities in line will be located accurately in short time.

Specifications:

Range: up to 99.9kms

Fault resolution - +/- 50 meters throughout the range of 99.9 kilometers

Signature analysis: Every 50m with accurate results

Operating temperature: -20 degree C to 60 degree C

Fault detection: All types of OPEN faults, SHORT faults and faults on spur lines

Power Supply: 15VDC and Built-in rechargeable battery

Display: High resolution illuminated LCD display

Outputs: Printout in 4 formats, Graphic LCD display & Complete Analysis data to Laptop loaded with TADMA Software

Type of Signal Transmission: Pulse

 Direct PC storage - No cumbersome interfacing modules to storage units, Review and print only selected frames / data.

Control: Automatic mode and Manual mode

The TAURUS  overhead Power Line Fault Analyser System is designed & developed to be utilized as a precise fault locating tool for Main and Spur lines with extended applications of line healthiness study, pre-charging and pre-commissioning checks. 

Deployment of the Power line fault analyser at each substation ensures optimal uptime of the power line network. This can be achieved through: 

- Enhanced life of the deployed Power Lines 

- Identify any fault during commissioning and trips- 

- Faster deployment of power during disaster management situations 

Application of the Power Line Fault Analyser 

1. Line diagnostic study (Predictive maintenance): Historical data of the Line Signature is extremely beneficial to plan the Maintenance Work well in advance to prevent breakdowns. 

The Distribution Line Fault Analyser comes with inbuilt software application which compares the current Signature with the earlier reading and highlights the differences with the help of a Laptop. This software helps to study & analyser the trend in the abnormalities being developed in the Power Line. 

Taking line signatures at regular intervals helps in monitoring of the condition of the lines and one can predict the breakdown using this tool. 

b.    F a u l t l o c a t i o n ( D i s a s t e r Management): 

The Power Line Fault Analyser precisely detects any or all types of open & short faults that causes 

line breakdown. An important tool for accurate fault finding that can save enormous time and revenue for the utility. 

During Disaster Management situations, this is an indispensable tool to quickly identify the faults and restore the entire Power line system. The Power Line Fault Analyser helps in identifying the abnormal points in the line quickly irrespective of the length of the line, which otherwise would have been done with manual inspection. Considerable time & money can be saved instead of patrolling enter line. 

Application: 

The following tests are conducted on the power line with the Taurus MAX-3 for Power Line 

- Power Line continuity test 

- Power line Phase sequence tests 

- Line Signature Analysis study for the entire length of the Power line 

- Line Healthiness Analysis and diagnostics 

- Commissioning of new Overhead Power Lines 

- Virtual Line Patrolling 

- Prediction of inhomogeneous points in the Power line 

- Overhead Power Line Signature Analysis 

- Offline Fault Location 

- All types of faults & inhomogeneity in the line is located accurately with a resolution of +/- 100 Mtrs within a very short period of time. 

These tests does not require any complimentary & supporting data / equipment at the far end of the line.

The TAURUS  overhead Power Line Fault Analyser System is designed & developed to be utilized as a precise fault locating tool for Main and Spur lines with extended applications of line healthiness study, pre-charging and pre-commissioning checks. 

Deployment of the Power line fault analyser at each substation ensures optimal uptime of the power line network. This can be achieved through: 

- Enhanced life of the deployed Power Lines 

- Identify any fault during commissioning and trips- 

- Faster deployment of power during disaster management situations 

Application of the Power Line Fault Analyser 

1. Line diagnostic study (Predictive maintenance): Historical data of the Line Signature is extremely beneficial to plan the Maintenance Work well in advance to prevent breakdowns. 

The Distribution Line Fault Analyser comes with inbuilt software application which compares the current Signature with the earlier reading and highlights the differences with the help of a Laptop. This software helps to study & analyser the trend in the abnormalities being developed in the Power Line. 

Taking line signatures at regular intervals helps in monitoring of the condition of the lines and one can predict the breakdown using this tool. 

b.    F a u l t l o c a t i o n ( D i s a s t e r Management): 

The Power Line Fault Analyser precisely detects any or all types of open & short faults that causes 

line breakdown. An important tool for accurate fault finding that can save enormous time and revenue for the utility. 

During Disaster Management situations, this is an indispensable tool to quickly identify the faults and restore the entire Power line system. The Power Line Fault Analyser helps in identifying the abnormal points in the line quickly irrespective of the length of the line, which otherwise would have been done with manual inspection. Considerable time & money can be saved instead of patrolling enter line. 

Application: 

The following tests are conducted on the power line with the Taurus MAX-3 for Power Line 

- Power Line continuity test 

- Power line Phase sequence tests 

- Line Signature Analysis study for the entire length of the Power line 

- Line Healthiness Analysis and diagnostics 

- Commissioning of new Overhead Power Lines 

- Virtual Line Patrolling 

- Prediction of inhomogeneous points in the Power line 

- Overhead Power Line Signature Analysis 

- Offline Fault Location 

- All types of faults & inhomogeneity in the line is located accurately with a resolution of +/- 100 Mtrs within a very short period of time. 

These tests does not require any complimentary & supporting data / equipment at the far end of the line. 

TAURUS Overhead AC Distribution Line Analyzer is a revolutionary innovative system to significantly minimize the distribution line downtime and overall line maintenance time. SIGMAX is the third generation, one of its kind products that work on the principle of multiple pulse echo co-relation technique, using advanced matrix processors. A single system offers a cost effective monitoring of all AC overhead de- energized lines from 11kV to 33kV, providing accurate information on all faults and line signature analysis, which give data of all inhomogeneous points. A stand alone, portable, offline kit capable of finding fault accurately to the tower (non-system based, non-stress affected), is required not only to accurately find faults, but also to declare line healthy after a short duration of sustained transient fault avoiding rigorous patrolling.

Applications:

*Exact length of the line is digitally measured & hence provides the most accurate distance in kilometers.
* Continuity test.

*Phase sequence tests.

* Line Signature Analysis study for the entire length of line etc., and all this without the necessity for any complimentary & supporting equipment at the far end of the line.

* Line Healthiness Analysis and diagnosis

* Commissioning of new Overhead Distribution Line

* Virtual Line Patrolling

* Predicts inhomogeneous points

* Overhead AC Distribution Line Signature Analysis

* Offline Fault Location

* All types of faults & inhomogeneities in line will be located accurately in short time.

Specifications:

* Range: up to 99.9kms

* Fault resolution - +/- 50 meters throughout the range of 99.9 kilometers

* Signature analysis: Every 50m with accurate results

* Operating temperature: -20°C to 60°C

* Fault detection: All types of 'OPEN' faults, 'SHORT' faults and faults on spur lines

* Power Supply: 15VDC and Built-in rechargeable battery

* Display: High resolution illuminated LCD display

* Outputs: Printout in 4 formats, Graphic LCD display & Complete Analysis data to Laptop loaded with TADMA Software

* Type of Signal Transmission: Pulse

* Direct PC storage - No cumbersome interfacing modules to storage units, Review and print only selected frames / data.

* Control: Automatic mode and Manual mode

TAURUS Overhead AC Distribution Line Analyzer is a revolutionary innovative system to significantly minimize the distribution line downtime and overall line maintenance time. SIGMAX is the third generation, one of its kind products that work on the principle of multiple pulse echo co-relation technique, using advanced matrix processors. A single system offers a cost effective monitoring of all AC overhead de- energized lines from 11kV to 33kV, providing accurate information on all faults and line signature analysis, which give data of all inhomogeneous points. A stand alone, portable, offline kit capable of finding fault accurately to the tower (non-system based, non-stress affected), is required not only to accurately find faults, but also to declare line healthy after a short duration of sustained transient fault avoiding rigorous patrolling.

Applications:

* Exact length of the line is digitally measured & hence provides the most accurate distance in kilometers.

* Continuity test.

* Phase sequence tests.

* Line Signature Analysis study for the entire length of line etc., and all this without the necessity for any complimentary & supporting equipment at the far end of the line.

* Line Healthiness Analysis and diagnosis

* Commissioning of new Overhead Distribution Line

* Virtual Line Patrolling

* Predicts inhomogeneous points

* Overhead AC Distribution Line Signature Analysis

* Offline Fault Location

* All types of faults & inhomogeneities in line will be located accurately in short time.

Specifications:

* Range: up to 99.9kms

* Fault resolution - +/- 50 meters throughout the range of 99.9 kilometers

* Signature analysis: Every 50m with accurate results

* Operating temperature: -20°C to 60°C

* Fault detection: All types of 'OPEN' faults, 'SHORT' faults and faults on spur lines

* Power Supply: 15VDC and Built-in rechargeable battery

* Display: High resolution illuminated LCD display

* Outputs: Printout in 4 formats, Graphic LCD display & Complete Analysis data to Laptop loaded with TADMA Software

* Type of Signal Transmission: Pulse

* Direct PC storage - No cumbersome interfacing modules to storage units, Review and print only selected frames / data.

* Control: Automatic mode and Manual mode

The TAURUS  overhead Power Line Fault Analyser System is designed & developed to be utilized as a precise fault locating tool for Main and Spur lines with extended applications of line healthiness study, pre-charging and pre-commissioning checks. 

Deployment of the Power line fault analyser at each substation ensures optimal uptime of the power line network. This can be achieved through: 

- Enhanced life of the deployed Power Lines 

- Identify any fault during commissioning and trips- 

- Faster deployment of power during disaster management situations 

Application of the Power Line Fault Analyser 

1. Line diagnostic study (Predictive maintenance): Historical data of the Line Signature is extremely beneficial to plan the Maintenance Work well in advance to prevent breakdowns. 

The Distribution Line Fault Analyser comes with inbuilt software application which compares the current Signature with the earlier reading and highlights the differences with the help of a Laptop. This software helps to study & analyser the trend in the abnormalities being developed in the Power Line. 

Taking line signatures at regular intervals helps in monitoring of the condition of the lines and one can predict the breakdown using this tool. 

b.    F a u l t l o c a t i o n ( D i s a s t e r Management): 

The Power Line Fault Analyser precisely detects any or all types of open & short faults that causes 

line breakdown. An important tool for accurate fault finding that can save enormous time and revenue for the utility. 

During Disaster Management situations, this is an indispensable tool to quickly identify the faults and restore the entire Power line system. The Power Line Fault Analyser helps in identifying the abnormal points in the line quickly irrespective of the length of the line, which otherwise would have been done with manual inspection. Considerable time & money can be saved instead of patrolling enter line. 

Application: 

The following tests are conducted on the power line with the Taurus MAX-3 for Power Line 

- Power Line continuity test 

- Power line Phase sequence tests 

- Line Signature Analysis study for the entire length of the Power line 

- Line Healthiness Analysis and diagnostics 

- Commissioning of new Overhead Power Lines 

- Virtual Line Patrolling 

- Prediction of inhomogeneous points in the Power line 

- Overhead Power Line Signature Analysis 

- Offline Fault Location 

- All types of faults & inhomogeneity in the line is located accurately with a resolution of +/- 100 Mtrs within a very short period of time. 

These tests does not require any complimentary & supporting data / equipment at the far end of the line. 

The APEX-D is a revolutionary innovative system significantly minimize the transmission line downtime and overall line maintenance time. APEX-D is the third generation, one of its kind product that works on the principle of multiple pulse echo co-relation technique, using advanced matrix processors. A single system offers a cost effective monitoring of all DC overhead de-energized lines providing accurate information on all faults and line signature analysis, which give data of all inhomogeneous points. 

The overhead HVDC Power Line Fault Analyser System is designed & developed to be utilized as a precise fault locating tool for main lines with extended applications of line healthiness study, pre-charging and pre-commissioning checks. 

Deployment of the HVDC Power line fault analyser at each substation ensures optimal uptime of the HVDC power line network. This can be achieved through: 

- Enhanced life of the deployed Power Lines 

- Identify any fault during commissioning and trips 

- Faster deployment of power during disaster management situations 

 Application of the Power Line Fault Analyser: 

Fault location (Disaster Management): The HVDC Power Line Fault Analyser precisely detects any or all types of open & short faults that causes line breakdown. An important tool for accurate fault finding that can save enormous time and revenue for the utility. 

During Disaster Management situations, this is an indispensable tool to quickly identify the faults and restore the entire Power line system. The HVDC Power Line Fault Analyser helps in identifying the inhomogeneous points in the line quickly irrespective of the length of the line, which otherwise would have been done with manual inspection. Considerable time & money can be saved instead of patrolling enter line. Line diagnostic study (Predictive maintenance): Historical data of the Line Signature is extremely beneficial to plan the Maintenance Work well in advance to prevent breakdowns. 

The HVDC Power Line Fault Analyser comes with inbuilt software application which compares the current Signature with the earlier reading and highlights the differences with the help of a Laptop. This software helps to study & analyse the trend in the abnormalities being developed in the Power Line. Taking line signatures at regular intervals helps in monitoring of the condition of the lines and one can predict the breakdown using this tool. 

 Benefits: 

We suggest deployment one set of Taurus APEX-D at each HVDC substation. With all substations being equipped, will help to attend the faults immediately and restore power lines quickly and make them available. 

This investment would immediately contribute to bring in the following benefits 

- Maximize availability / uptime of the HVDC Power line. 

- Attain optimum Power Transmission levels 

- Effective maintenance of Transmission system. 

- Disaster management preparedness 

- Mega Watts saved = Revenue saved 

The Taurus APEX-D for HVDC power line is applicable for any line from +/- 500kV to +/- 800kV. Integrated with the advanced data management & reporting software TADMA, line study, fault finding & pre-charging checks have now been simplified with these portable user friendly fault analyser systems.